Add translation support for v2.14

lang/nl_nl.json

@@ -138,8 +138,6 @@
     "This DualSense controller has outdated firmware.": "Deze DualSense-controller heeft verouderde firmware.",
     "Please update the firmware and try again.": "Update de firmware en probeer het opnieuw.",
     "Joystick Info": "Joystick Info",
-    "Err R:": "Err R:",
-    "Err L:": "Err L:",
     "Check circularity": "Controleer de circulariteit",
     "(Dualsense) Will updating the firmware reset calibration?": "",
     "(beta)": "",
@@ -159,12 +157,14 @@
     "Cannot lock": "",
     "Cannot store data into": "",
     "Cannot unlock": "",
+    "Center (L1)": "",
     "Center X": "",
     "Center Y": "",
     "Changes saved successfully": "",
     "Chroma Indigo": "",
     "Chroma Pearl": "",
     "Chroma Teal": "",
+    "Circularity (R1)": "",
     "Cobalt Blue": "",
     "Color": "",
     "Color detection thanks to": "",
@@ -202,6 +202,7 @@
     "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
     "Midnight Black": "",
     "More details and images": "",
+    "Move the stick to select it for tuning, then without touching the stick use the D-pad buttons to adjust the center point. Flick it and adjust it again if it is off center or flickers.": "",
     "No.": "",
     "Normal": "",
     "Nova Pink": "",
@@ -210,8 +211,11 @@
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
     "Please read the instructions.": "",
+    "Please release the stick to center position before adjusting with D-pad buttons.": "",
     "Press L2 to test the strong (left) haptic motor": "",
     "Press R2 to test the weak (right) haptic motor": "",
+    "Press the D-pad or face buttons in the direction you want the stick position to move.": "",
+    "Push the stick straight up/down/left/right as far as possible.": "",
     "Reboot controller": "",
     "Right Module Barcode": "",
     "Right stick": "",
@@ -220,6 +224,7 @@
     "Save changes permanently": "",
     "Serial Number": "",
     "Show all": "",
+    "Show raw numbers": "",
     "Software": "",
     "Spider FW Version": "",
     "Spider-Man 2": "",
@@ -245,6 +250,7 @@
     "Venom FW Version": "",
     "Volcanic Red": "",
     "We are not responsible for any damage caused by attempting this modification.": "",
+    "While holding the stick to be adjusted straight up/down/left/right, <em>observe the highlighted value below the circle</em>, then use the D-pad buttons to adjust the value to ±0.99 (just below ±1.00).": "",
     "White": "",
     "Yes. Simply do another permanent calibration.": "",
     "You can do this in two ways:": "",