diff --git a/core.js b/core.js
index 1863300..1af8f62 100644
--- a/core.js
+++ b/core.js
@@ -205,10 +205,10 @@ async function ds5_flash() {
 async function ds5_edge_flash() {
     la("ds5_edge_flash");
     try {
-        await ds5_edge_flash_modules();
-        await ds5_reset();
-        show_popup("<b>" + l("Changes saved successfully") + "</b>.<br><br>" + l("If the calibration is not stored permanently, please double-check the wirings of the hardware mod.") + "<br>" + l("Please disconnect and reconnect the controller."), true);
-        await disconnect();
+        ret = await ds5_edge_flash_modules();
+        if(ret) {
+            show_popup("<b>" + l("Changes saved successfully") + "</b>.<br><br>" + l("If the calibration is not stored permanently, please double-check the wirings of the hardware mod."), true);
+        }
     } catch(error) {
         show_popup(l("Error while saving changes: ") + toString(error));
     }
@@ -492,6 +492,22 @@ async function ds4_getbdaddr() {
     }
 }
 
+async function ds5_edge_get_barcode() {
+    try {
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [21,34]));
+        await new Promise(r => setTimeout(r, 100));
+
+        data = lf("ds5_edge_get_barcode", await device.receiveFeatureReport(0x81));
+        td = new TextDecoder()
+
+        r_bc = td.decode(data.buffer.slice(21, 21+17));
+        l_bc = td.decode(data.buffer.slice(40, 40+17));
+        return [r_bc, l_bc];
+    } catch(e) {
+        return "error";
+    }
+}
+
 async function ds5_getbdaddr() {
     try {
         await device.sendFeatureReport(0x80, alloc_req(0x80, [9,2]));
@@ -531,7 +547,30 @@ async function ds5_system_info(base, num, length, decode = true) {
     return l("Unknown");
 }
 
-async function ds5_info() {
+function ds5_edge_color(x) {
+    const colorMap = {
+        '00' : 'White',
+        '01' : 'Black',
+        '02' : 'Cosmic Red',
+        '03' : 'Nova Pink',
+        '04' : 'Galactic Purple',
+        '05' : 'Starlight Blue',
+        '06' : 'Gray Camo',
+        '07' : 'Volcanic Red',
+        '08' : 'Sterling Silver',
+        '09' : 'Chroma Indigo',
+        '30' : '30Th Anniversary',
+        'Z1' : 'God of War Ragnarok',
+        'Z3' : 'Astro Bot'
+    };
+
+    const colorCode = x.slice(4, 6);
+    const colorName = colorMap[colorCode] || 'Unknown';
+    return colorName;
+}
+
+
+async function ds5_info(is_edge) {
     try {
         const view = lf("ds5_info", await device.receiveFeatureReport(0x20));
 
@@ -559,14 +598,23 @@ async function ds5_info() {
 
         b_info = '&nbsp;<a class="link-body-emphasis" href="#" onclick="board_model_info()">' + 
                 '<svg class="bi" width="1.3em" height="1.3em"><use xlink:href="#info"/></svg></a>';
+        c_info = '&nbsp;<a class="link-body-emphasis" href="#" onclick="edge_color_info()">' + 
+                 '<svg class="bi" width="1.3em" height="1.3em"><use xlink:href="#info"/></svg></a>';
 
-        append_info(l("Serial Number"), await ds5_system_info(1, 19, 17), "hw");
+        serial_number = await ds5_system_info(1, 19, 17);
+        append_info(l("Serial Number"), serial_number, "hw");
         append_info_extra(l("MCU Unique ID"), await ds5_system_info(1, 9, 9, false), "hw");
         append_info_extra(l("PCBA ID"), await ds5_system_info(1, 17, 14), "hw");
         append_info_extra(l("Battery Barcode"), await ds5_system_info(1, 24, 23), "hw");
         append_info_extra(l("VCM Left Barcode"), await ds5_system_info(1, 26, 16), "hw");
         append_info_extra(l("VCM Right Barcode"), await ds5_system_info(1, 28, 16), "hw");
-        append_info(l("Board Model"), ds5_hw_to_bm(hwinfo) + b_info, "hw");
+
+        if(is_edge) {
+            color = ds5_edge_color(serial_number);
+            append_info(l("Color"), color + c_info, "hw");
+        } else {
+            append_info(l("Board Model"), ds5_hw_to_bm(hwinfo) + b_info, "hw");
+        }
 
         append_info(l("FW Build Date"), build_date + " " + build_time, "fw");
         append_info_extra(l("FW Type"), "0x" + dec2hex(fwtype), "fw");
@@ -592,6 +640,7 @@ async function ds5_info() {
         nvstatus = await ds5_nvstatus();
         if(nvstatus == 0)
             await ds5_nvlock();
+
         bd_addr = await ds5_getbdaddr();
         append_info(l("Bluetooth Address"), bd_addr, "hw");
     } catch(e) {
@@ -602,6 +651,18 @@ async function ds5_info() {
     return true;
 }
 
+async function ds5_load_modules_info() {
+    empty = '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
+    // DS Edge
+    sticks_barcode = await ds5_edge_get_barcode();
+    for(i=0;i<2;i++) {
+        if(sticks_barcode[i] == empty)
+            sticks_barcode[i] = l("Unknown")
+    }
+    append_info(l("Left Module Barcode"), sticks_barcode[1], "fw");
+    append_info(l("Right Module Barcode"), sticks_barcode[0], "fw");
+}
+
 async function ds5_calibrate_sticks_begin() {
     la("ds5_calibrate_sticks_begin");
     var err = l("Range calibration failed: ");
@@ -863,36 +924,124 @@ async function ds5_nvlock() {
     }
 }
 
+async function wait_until_written(expected) {
+    for(it=0;it<10;it++) {
+        data = await device.receiveFeatureReport(0x81)
+
+        again = false
+        for(i=0;i<expected.length;i++)
+            if(data.getUint8(1+i, true) != expected[i]) {
+                again = true;
+                break;
+            }
+        if(!again) {
+            return true;
+        }
+        await new Promise(r => setTimeout(r, 50));
+    }
+    return false;
+}
+
+function set_edge_progress(score) {
+    $("#dsedge-progress").css({ "width": score + "%" })
+}
+
 async function ds5_edge_flash_modules() {
     la("ds5_edge_flash_modules");
     var modal = null;
+
+    if (device == null)
+        return;
+
     try {
         modal = new bootstrap.Modal(document.getElementById('edgeProgressModal'), {})
         modal.show();
+        set_edge_progress(0);
 
-        if(device != null) {
-            await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 6, 0, 11]))
-            await new Promise(r => setTimeout(r, 200));
-            await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 5, 0]))
-            await new Promise(r => setTimeout(r, 200));
+        // Reload data, this ensures correctly writing data in the controller
+        await ds5_nvunlock()
+        await new Promise(r => setTimeout(r, 50));
+        set_edge_progress(5);
 
-            await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 6, 1, 11]))
-            await new Promise(r => setTimeout(r, 200));
-            await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 5, 1]))
-            await new Promise(r => setTimeout(r, 200));
+        data = await ds5_get_inmemory_module_data()
+        await new Promise(r => setTimeout(r, 50));
+        set_edge_progress(10);
+        await write_finetune_data(data)
+
+        await new Promise(r => setTimeout(r, 100));
+        set_edge_progress(15);
+
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 6, 0]))
+        await new Promise(r => setTimeout(r, 200));
+        ret = await wait_until_written([21, 6, 2])
+        if(!ret) {
+            throw new Error(l("Cannot unlock") + " " + l("left module"));
         }
-        await new Promise(r => setTimeout(r, 500));
-        if(device != null) {
-        data = await device.receiveFeatureReport(0x81)
+
+        await new Promise(r => setTimeout(r, 100));
+
+        set_edge_progress(30);
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 5, 0]))
+        await new Promise(r => setTimeout(r, 200));
+        ret = await wait_until_written([21, 5, 2])
+        if(!ret) {
+            throw new Error(l("Cannot store data into") + " " + l("left module"));
         }
-        await new Promise(r => setTimeout(r, 1000));
+
+        await new Promise(r => setTimeout(r, 100));
+
+        set_edge_progress(45);
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 6, 1]))
+        await new Promise(r => setTimeout(r, 200));
+        ret = await wait_until_written([21, 6, 2])
+        if(!ret) {
+            throw new Error(l("Cannot unlock") + " " + l("right module"));
+        }
+
+        await new Promise(r => setTimeout(r, 100));
+        set_edge_progress(60);
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 5, 1]))
+        await new Promise(r => setTimeout(r, 200));
+        ret = await wait_until_written([21, 5, 2])
+        if(!ret) {
+            throw new Error(l("Cannot store data into") + " " + l("right module"));
+        }
+
+        set_edge_progress(75);
+
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 4, 0, 0]))
+        await new Promise(r => setTimeout(r, 200));
+        ret = await wait_until_written([21, 4, 2])
+        if(!ret) {
+            throw new Error(l("Cannot lock") + " " + l("left module"));
+        }
+
+        set_edge_progress(90);
+
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [21, 4, 1, 0]))
+        await new Promise(r => setTimeout(r, 200));
+        ret = await wait_until_written([21, 4, 2])
+        if(!ret) {
+            throw new Error(l("Cannot lock") + " " + l("right module"));
+        }
+
+        set_edge_progress(100);
+
+        await new Promise(r => setTimeout(r, 100));
+        await ds5_nvlock()
+
+        await new Promise(r => setTimeout(r, 250));
         modal.hide();
-        await ds5_reset();
+        modal = null;
+        await new Promise(r => setTimeout(r, 300));
+
+        return true;
     } catch(e) {
         modal.hide();
-
+        modal = null;
         await new Promise(r => setTimeout(r, 500));
-        return show_popup(l("NVS Unlock failed: ") + e);
+        show_popup("Error: " + e);
+        return false;
     }
 }
 
@@ -1058,30 +1207,46 @@ async function ds5_finetune() {
     refresh_finetune()
 }
 
-async function read_finetune_data() {
-    await device.sendFeatureReport(0x80, alloc_req(0x80, [12,2]))
+async function ds5_get_inmemory_module_data() {
+    if (mode == 2) {
+        // DualSense
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [12, 2]))
+    } else if(mode == 3) {
+        // DualSense Edge
+        await device.sendFeatureReport(0x80, alloc_req(0x80, [12, 4]))
+    }
     var data = await device.receiveFeatureReport(0x81)
     var cmd = data.getUint8(0, true);
     var p1 = data.getUint8(1, true);
     var p2 = data.getUint8(2, true);
     var p3 = data.getUint8(3, true);
-    if(cmd != 129 || p1 != 12 || p2 != 2 || p3 != 2)
-    {
+
+    if(cmd != 129 || p1 != 12 || (p2 != 2 && p2 != 4) || p3 != 2)
+        return null;
+
+    var out = []
+    for(i=0;i<12;i++)
+        out.push(data.getUint16(4+i*2, true))
+    return out;
+}
+
+async function read_finetune_data() {
+    data = ds5_get_inmemory_module_data();
+    if(data == null) {
         finetune_close();
         show_popup("ERROR: Cannot read calibration data");
         return null;
     }
-    var out = []
-    for(i=0;i<12;i++)
-        out.push(data.getUint16(4+i*2, true))
-    last_written_finetune_data = out
-    return out;
+
+    last_written_finetune_data = data;
+    return data;
 }
 
 async function write_finetune_data(data) {
     if (data.length != 12) {
         return;
     }
+
     if (data == last_written_finetune_data) {
         return;
     }
@@ -1614,21 +1779,24 @@ async function continue_connection(report) {
         } else if(device.productId == 0x0ce6) {
             $("#infoshowall").show()
             $("#ds5finetune").show()
-            if(await ds5_info()) {
+            if(await ds5_info(false)) {
                 connected = true;
                 mode = 2;
                 devname = l("Sony DualSense");
                 device.oninputreport = process_ds_input;
             }
         } else if(device.productId == 0x0df2) {
-            $("#infoshowall").hide()
-            $("#ds5finetune").hide()
-            if(await ds5_info()) {
+            $("#infoshowall").show()
+            $("#ds5finetune").show()
+            if(await ds5_info(true)) {
                 connected = true;
                 mode = 3;
                 devname = l("Sony DualSense Edge");
+                device.oninputreport = process_ds_input;
+                await ds5_load_modules_info();
             }
 
+
             n = await ds5_nvstatus();
             if(n == 4) {
                 // dualsense edge with pending reboot
@@ -1638,8 +1806,6 @@ async function continue_connection(report) {
                 show_popup(l("A reboot is needed to continue using this DualSense Edge. Please disconnect and reconnect your controller."));
                 return;
             }
-
-            device.oninputreport = process_ds_input;
         } else {
             $("#btnconnect").prop("disabled", false);
             $("#connectspinner").hide();
@@ -1664,8 +1830,9 @@ async function continue_connection(report) {
             return;
         }
 
-        if(mode == 3)
+        if(mode == 3) {
             show_edge_modal();
+        }
 
         if(disable_btn != 0)
             update_disable_btn();
@@ -1797,7 +1964,7 @@ async function multi_nvslock() {
     if(mode == 1) {
         await ds4_nvlock();
         await ds4_nvstatus();
-    } else {
+    } else if (mode == 2) {
         await ds5_nvlock();
         await ds5_nvstatus();
     }
@@ -1935,6 +2102,12 @@ function discord_popup() {
     show_popup(l("My handle on discord is: the_al"));
 }
 
+function edge_color_info() {
+    la("cm_info");
+    text = l("Color detection thanks to") + ' romek77 from Poland.';
+    show_popup(text, true);
+}
+
 function board_model_info() {
     la("bm_info");
     l1 = l("This feature is experimental.");
diff --git a/index.html b/index.html
index cb08f30..eb7bb20 100644
--- a/index.html
+++ b/index.html
@@ -564,6 +564,12 @@ dl.row dd { font-family: monospace; }
       <div class="modal-body">
         <p class="ds-i18n">Calibration is being stored in the stick modules.</p>
         <p class="ds-i18n">Please do not close this window and do not disconnect your controller. </p>
+
+        <div class="progress" role="progressbar" aria-valuenow="0" aria-valuemin="0" aria-valuemax="100">
+        <div id="dsedge-progress" class="progress-bar progress-bar-striped progress-bar-animated" style="width: 0%"></div>
+        </div>
+
+
       </div>
     </div>
   </div>
@@ -824,7 +830,7 @@ dl.row dd { font-family: monospace; }
 <div class="container">
   <footer>
     <div class="d-flex flex-column flex-sm-row justify-content-between py-4 my-4 border-top" id="footbody">
-        <p><a target="_blank" href="https://github.com/dualshock-tools/dualshock-tools.github.io/commits/main/"><span class="ds-i18n">Version</span> 2.4</a> (2025-05-02) - <a href="#" class="ds-i18n" onclick="show_donate_modal();">Support this project</a>&nbsp;<span id="authorMsg"></span></p>
+        <p><a target="_blank" href="https://github.com/dualshock-tools/dualshock-tools.github.io/commits/main/"><span class="ds-i18n">Version</span> 2.5</a> (2025-05-17) - <a href="#" class="ds-i18n" onclick="show_donate_modal();">Support this project</a>&nbsp;<span id="authorMsg"></span></p>
 
       <ul class="list-unstyled d-flex">
         <li class="ms-3"><a class="link-body-emphasis" href="mailto:ds4@the.al" target="_blank"><svg class="bi" width="24" height="24"><use xlink:href="#mail"/></svg></a></li>
diff --git a/lang/ar_ar.json b/lang/ar_ar.json
index 647ff9b..986a1ad 100644
--- a/lang/ar_ar.json
+++ b/lang/ar_ar.json
@@ -191,19 +191,25 @@
     "<b>Internally</b>: by soldering a wire from a +1.8V source to the write-protect TP.": "",
     "Calibration is being stored in the stick modules.": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "DualSense Edge Calibration": "",
     "Finetune stick calibration": "",
     "For more info or help, feel free to reach out on Discord.": "",
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "More details and images": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "Save": "",
     "Support for calibrating DualSense Edge stick modules is now available as an <b>experimental feature</b>.": "",
@@ -215,5 +221,7 @@
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/bg_bg.json b/lang/bg_bg.json
index d1613f3..9d7805b 100644
--- a/lang/bg_bg.json
+++ b/lang/bg_bg.json
@@ -167,8 +167,13 @@
     "Bluetooth Address": "",
     "Calibration is being stored in the stick modules.": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -186,13 +191,14 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "More details and images": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/cz_cz.json b/lang/cz_cz.json
index 0f5b32d..e9b0db4 100644
--- a/lang/cz_cz.json
+++ b/lang/cz_cz.json
@@ -152,9 +152,14 @@
     "Can I reset a permanent calibration to previous calibration?": "",
     "Can you overwrite a permanent calibration?": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
     "Changes saved successfully": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -175,6 +180,7 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
@@ -183,10 +189,10 @@
     "Only after you have done that, you click on \"Done\".": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
     "Please read the instructions.": "",
     "Reboot controller": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "You can do this in two ways:": "",
     "You have to rotate the joysticks before you press \"Done\".": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/de_de.json b/lang/de_de.json
index 1ec776a..c578fd0 100644
--- a/lang/de_de.json
+++ b/lang/de_de.json
@@ -191,6 +191,11 @@
     "<b>Internally</b>: by soldering a wire from a +1.8V source to the write-protect TP.": "",
     "Bluetooth Address": "",
     "Calibration is being stored in the stick modules.": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "DualSense Edge Calibration": "",
     "FW Update": "",
     "FW Update Info": "",
@@ -198,12 +203,13 @@
     "For more info or help, feel free to reach out on Discord.": "",
     "HW Model": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
+    "Left Module Barcode": "",
     "MCU Unique ID": "",
     "More details and images": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "SBL FW Version": "",
     "Spider FW Version": "",
     "Support for calibrating DualSense Edge stick modules is now available as an <b>experimental feature</b>.": "",
@@ -215,5 +221,7 @@
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/es_es.json b/lang/es_es.json
index 631a3b9..73f91be 100644
--- a/lang/es_es.json
+++ b/lang/es_es.json
@@ -152,9 +152,14 @@
     "Can I reset a permanent calibration to previous calibration?": "",
     "Can you overwrite a permanent calibration?": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
     "Changes saved successfully": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -175,6 +180,7 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
@@ -183,10 +189,10 @@
     "Only after you have done that, you click on \"Done\".": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
     "Please read the instructions.": "",
     "Reboot controller": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "You can do this in two ways:": "",
     "You have to rotate the joysticks before you press \"Done\".": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/fr_fr.json b/lang/fr_fr.json
index 91e1ba7..3830a13 100644
--- a/lang/fr_fr.json
+++ b/lang/fr_fr.json
@@ -152,9 +152,14 @@
     "Can I reset a permanent calibration to previous calibration?": "",
     "Can you overwrite a permanent calibration?": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
     "Changes saved successfully": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -175,6 +180,7 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
@@ -183,10 +189,10 @@
     "Only after you have done that, you click on \"Done\".": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
     "Please read the instructions.": "",
     "Reboot controller": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "You can do this in two ways:": "",
     "You have to rotate the joysticks before you press \"Done\".": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/hu_hu.json b/lang/hu_hu.json
index 81a76dc..26ca6fa 100644
--- a/lang/hu_hu.json
+++ b/lang/hu_hu.json
@@ -212,7 +212,15 @@
     "We are not responsible for any damage caused by attempting this modification.": "Nem vállalunk felelősséget az ezen módosítás megkísérlése által okozott károkért.",
     "You can do this in two ways:": "Ezt kétféleképpen teheted meg:",
     "here": "itt",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
-    "Please disconnect and reconnect the controller.": "",
+    "Left Module Barcode": "",
+    "Right Module Barcode": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/it_it.json b/lang/it_it.json
index 441cc6a..27aae05 100644
--- a/lang/it_it.json
+++ b/lang/it_it.json
@@ -213,7 +213,15 @@
     "We are not responsible for any damage caused by attempting this modification.": "Non siamo responsabili per eventuali danni causati dal tentativo di questa modifica.",
     "You can do this in two ways:": "Puoi farlo in due modi:",
     "here": "qui",
-    "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
-    "Please disconnect and reconnect the controller.": "",
+    "Cannot lock": "Non riesco a bloccare il",
+    "Cannot store data into": "Non riesco a salvare i dati nel",
+    "Cannot unlock": "Non riesco a sbloccare il",
+    "Color": "Colore",
+    "Color detection thanks to": "Riconoscimento colore grazie a",
+    "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "Se la calibrazione non è salvata permanentemente, controlla i cablaggi della mod hardware.",
+    "Left Module Barcode": "Codice modulo sinistro",
+    "Right Module Barcode": "Codice modulo destro",
+    "left module": "modulo sinistro",
+    "right module": "modulo destro",
     "": ""
-}
\ No newline at end of file
+}
diff --git a/lang/jp_jp.json b/lang/jp_jp.json
index 768c071..b8998b5 100644
--- a/lang/jp_jp.json
+++ b/lang/jp_jp.json
@@ -163,7 +163,12 @@
     "Calibration is being stored in the stick modules.": "",
     "Can I reset a permanent calibration to previous calibration?": "",
     "Can you overwrite a permanent calibration?": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Changes saved successfully": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -181,6 +186,7 @@
     "Hardware": "",
     "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
+    "Left Module Barcode": "",
     "MCU Unique ID": "",
     "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
     "More details and images": "",
@@ -188,10 +194,10 @@
     "Only after you have done that, you click on \"Done\".": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
     "Please read the instructions.": "",
     "Reboot controller": "",
+    "Right Module Barcode": "",
     "SBL FW Version": "",
     "Save changes permanently": "",
     "Serial Number": "",
@@ -214,5 +220,7 @@
     "You can do this in two ways:": "",
     "You have to rotate the joysticks before you press \"Done\".": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/ko_kr.json b/lang/ko_kr.json
index d65f029..c66ed0c 100644
--- a/lang/ko_kr.json
+++ b/lang/ko_kr.json
@@ -190,19 +190,25 @@
     "<b>Internally</b>: by soldering a wire from a +1.8V source to the write-protect TP.": "",
     "Calibration is being stored in the stick modules.": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "DualSense Edge Calibration": "",
     "Finetune stick calibration": "",
     "For more info or help, feel free to reach out on Discord.": "",
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "More details and images": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "Save": "",
     "Support for calibrating DualSense Edge stick modules is now available as an <b>experimental feature</b>.": "",
@@ -214,5 +220,7 @@
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/nl_nl.json b/lang/nl_nl.json
index fd16b61..10ff93d 100644
--- a/lang/nl_nl.json
+++ b/lang/nl_nl.json
@@ -152,9 +152,14 @@
     "Can I reset a permanent calibration to previous calibration?": "",
     "Can you overwrite a permanent calibration?": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
     "Changes saved successfully": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -175,6 +180,7 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
@@ -183,10 +189,10 @@
     "Only after you have done that, you click on \"Done\".": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
     "Please read the instructions.": "",
     "Reboot controller": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "You can do this in two ways:": "",
     "You have to rotate the joysticks before you press \"Done\".": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/pl_pl.json b/lang/pl_pl.json
index 9e6466a..f10c700 100644
--- a/lang/pl_pl.json
+++ b/lang/pl_pl.json
@@ -202,18 +202,26 @@
     "<b>Externally</b>: by applying +1.8V directly to the visible test point without opening the controller": "",
     "<b>Internally</b>: by soldering a wire from a +1.8V source to the write-protect TP.": "",
     "Calibration is being stored in the stick modules.": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "DualSense Edge Calibration": "",
     "For more info or help, feel free to reach out on Discord.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
+    "Left Module Barcode": "",
     "More details and images": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Support for calibrating DualSense Edge stick modules is now available as an <b>experimental feature</b>.": "",
     "This involves temporarily disabling write protection by applying <b>+1.8V</b> to a specific test point on each module.": "",
     "This is only for advanced users. If you're not sure what you're doing, please do not attempt it.": "",
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/pt_br.json b/lang/pt_br.json
index d05bff3..dbb5e11 100644
--- a/lang/pt_br.json
+++ b/lang/pt_br.json
@@ -167,8 +167,13 @@
     "Bluetooth Address": "",
     "Calibration is being stored in the stick modules.": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -186,13 +191,14 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "More details and images": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/pt_pt.json b/lang/pt_pt.json
index 8633e8d..7274a63 100644
--- a/lang/pt_pt.json
+++ b/lang/pt_pt.json
@@ -210,9 +210,17 @@
     "We are not responsible for any damage caused by attempting this modification.": "Não nos responsabilizamos por quaisquer dano causado ​​ao tentar usar esta modificação.",
     "You can do this in two ways:": "Pode fazer isto de duas formas",
     "here": "Aqui",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "FW Series": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
+    "Left Module Barcode": "",
     "PCBA ID": "",
-    "Please disconnect and reconnect the controller.": "",
+    "Right Module Barcode": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/rs_rs.json b/lang/rs_rs.json
index 6a8baae..c5491bf 100644
--- a/lang/rs_rs.json
+++ b/lang/rs_rs.json
@@ -201,18 +201,26 @@
     "<b>Externally</b>: by applying +1.8V directly to the visible test point without opening the controller": "",
     "<b>Internally</b>: by soldering a wire from a +1.8V source to the write-protect TP.": "",
     "Calibration is being stored in the stick modules.": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "DualSense Edge Calibration": "",
     "For more info or help, feel free to reach out on Discord.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
+    "Left Module Barcode": "",
     "More details and images": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Support for calibrating DualSense Edge stick modules is now available as an <b>experimental feature</b>.": "",
     "This involves temporarily disabling write protection by applying <b>+1.8V</b> to a specific test point on each module.": "",
     "This is only for advanced users. If you're not sure what you're doing, please do not attempt it.": "",
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/ru_ru.json b/lang/ru_ru.json
index a6b6427..ffedc67 100644
--- a/lang/ru_ru.json
+++ b/lang/ru_ru.json
@@ -167,8 +167,13 @@
     "Bluetooth Address": "",
     "Calibration is being stored in the stick modules.": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -186,13 +191,14 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "More details and images": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/tr_tr.json b/lang/tr_tr.json
index 9bdd85a..1831a92 100644
--- a/lang/tr_tr.json
+++ b/lang/tr_tr.json
@@ -167,8 +167,13 @@
     "Bluetooth Address": "",
     "Calibration is being stored in the stick modules.": "",
     "Cancel": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
     "Center X": "",
     "Center Y": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "Controller Info": "",
     "Debug Info": "",
     "Debug buttons": "",
@@ -186,13 +191,14 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "",
+    "Left Module Barcode": "",
     "Left stick": "",
     "MCU Unique ID": "",
     "More details and images": "",
     "PCBA ID": "",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "",
-    "Please disconnect and reconnect the controller.": "",
     "Please note: the stick modules on the DS Edge <b>cannot be calibrated via software alone</b>.To store a custom calibration on the stick's internal memory, a <b>hardware modification</b> is required.": "",
+    "Right Module Barcode": "",
     "Right stick": "",
     "SBL FW Version": "",
     "Save": "",
@@ -214,5 +220,7 @@
     "We are not responsible for any damage caused by attempting this modification.": "",
     "You can do this in two ways:": "",
     "here": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/ua_ua.json b/lang/ua_ua.json
index b90c0f7..8299141 100644
--- a/lang/ua_ua.json
+++ b/lang/ua_ua.json
@@ -212,7 +212,15 @@
     "We are not responsible for any damage caused by attempting this modification.": "Ми не несемо відповідальності за будь-які пошкодження, спричинені спробами цієї модифікації.",
     "You can do this in two ways:": "Ви можете зробити це двома способами:",
     "here": "тут",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "",
-    "Please disconnect and reconnect the controller.": "",
+    "Left Module Barcode": "",
+    "Right Module Barcode": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file
diff --git a/lang/zh_cn.json b/lang/zh_cn.json
index 357865e..2b2ab59 100644
--- a/lang/zh_cn.json
+++ b/lang/zh_cn.json
@@ -214,6 +214,14 @@
     "You can do this in two ways:": "你可以用两种方式来做",
     "here": "这里",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "如果校准没有永久生效，请检查硬件模块的接线。",
-    "Please disconnect and reconnect the controller.": "请断开并重新连接手柄。",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
+    "Left Module Barcode": "",
+    "Right Module Barcode": "",
+    "left module": "",
+    "right module": "",
     "": ""
-}
+}
\ No newline at end of file
diff --git a/lang/zh_tw.json b/lang/zh_tw.json
index 99ecd63..2e12a0a 100644
--- a/lang/zh_tw.json
+++ b/lang/zh_tw.json
@@ -163,8 +163,6 @@
     "(beta)": "測試版本",
     "<b>Externally</b>: by applying +1.8V directly to the visible test point without opening the controller.": "<b>外部方式</b>：直接將 +1.8V 電壓施加到可見的測試點，無需打開手把",
     "<b>Internally</b>: by soldering a wire from a +1.8V source to the write-protect TP.": "<b>內部方式</b>：從 +1.8V 電源點焊接一條導線至寫入保護測試點（TP）",
-    "Battery Barcode": "",
-    "Bluetooth Address": "",
     "Calibration is being stored in the stick modules.": "校正資料正被儲存到搖桿模組中。",
     "Cancel": "取消",
     "Center X": "X軸中心",
@@ -186,7 +184,6 @@
     "I'm actively working on adding compatibility, the primary challenge lies in storing data into the stick modules.": "我正在積極處理相容性的問題，主要的挑戰在於將資料儲存到記憶模組中。",
     "If this tool has been helpful to you or you want to see DualSense Edge support arrive faster, please consider supporting the project with a": "如果這個工具對您有所幫助，或您希望看到 DualSense Edge 支援更快推出，請考慮通過以下方式支持該專案：",
     "Left stick": "左搖桿電壓(mV)",
-    "MCU Unique ID": "",
     "More details and images": "更多詳情與圖片",
     "PCBA ID": "PCBA ID",
     "Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.": "請將 DualShock 4、DualSense 或 DualSense Edge 手把連接到您的電腦，然後按下「連接」。",
@@ -195,7 +192,6 @@
     "Right stick": "右搖桿電壓(mV)",
     "SBL FW Version": "SBL韌體版本",
     "Save": "儲存",
-    "Serial Number": "",
     "Show all": "顯示全部資訊",
     "Software": "軟體",
     "Spider FW Version": "Spider韌體版本",
@@ -207,13 +203,25 @@
     "This screen allows to finetune raw calibration data on your controller": "此畫面可讓您微調手把上的原始校正資料",
     "Touchpad FW Version": "觸摸版韌體版本",
     "Touchpad ID": "觸摸版ID",
-    "VCM Left Barcode": "",
-    "VCM Right Barcode": "",
-    "Venom FW Version": "",
     "We are not responsible for any damage caused by attempting this modification.": "我們不對嘗試此修改所造成的任何損壞負責。",
     "You can do this in two ways:": "您可以透過兩種方式來完成這項操作：",
     "here": "這裏",
     "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "如果校準沒有永久生效，請檢查硬件模塊的接線。",
-    "Please disconnect and reconnect the controller.": "請斷開並重新連接手把。",
+    "Battery Barcode": "",
+    "Bluetooth Address": "",
+    "Cannot lock": "",
+    "Cannot store data into": "",
+    "Cannot unlock": "",
+    "Color": "",
+    "Color detection thanks to": "",
+    "Left Module Barcode": "",
+    "MCU Unique ID": "",
+    "Right Module Barcode": "",
+    "Serial Number": "",
+    "VCM Left Barcode": "",
+    "VCM Right Barcode": "",
+    "Venom FW Version": "",
+    "left module": "",
+    "right module": "",
     "": ""
 }
\ No newline at end of file