diff --git a/lang/da_dk.json b/lang/da_dk.json
index ea92a3b..86f4456 100644
--- a/lang/da_dk.json
+++ b/lang/da_dk.json
@@ -66,7 +66,7 @@
     "Sony DualSense": "Sony DualSense",
     "Sony DualSense Edge": "Sony DualSense Edge",
     "Connected invalid device": "Forbundet til en ugyldig enhed",
-    "The device appears to be a clone. All calibration functionality is disabled.": "",
+    "The device appears to be a clone. All calibration functionality is disabled.": "Enheden ser ud til at være en kopi. Al kalibreringsfunktionalitet er deaktiveret.",
     "Error": "Fejl",
     "My handle on discord is: the_al": "Mit brugernavn på Discord er: the_al",
     "Initializing...": "Initialiserer...",
@@ -238,76 +238,79 @@
     "Show raw numbers": "Vis faktiske tal",
     "The device is connected via Bluetooth. Disconnect and reconnect using a USB cable instead.": "Enheden er forbundet via Bluetooth. Afbryd forbindelsen, og tilslut den igen med et USB-kabel i stedet.",
     "Your device might not be a genuine Sony controller. If it is not a clone then please report this issue.": "Din enhed er muligvis ikke en ægte Sony-controller. Hvis det ikke er en kopi, bedes du rapportere dette problem.",
-    "<strong>Average circularity error:</strong> smaller is not always better! Aim for 7-9 %.": "",
-    "A reboot is needed to continue using this DualSense Edge. Please disconnect and reconnect your controller.": "",
-    "Adaptive Trigger": "",
-    "Adaptive triggers are only supported on DualSense controllers": "",
-    "Add test": "",
-    "Be gentle to avoid damage.": "",
-    "Buttons": "",
-    "Center": "",
-    "Circularity": "",
-    "Controller does not support adaptive trigger control": "",
-    "Don't show again": "",
-    "Fail": "",
-    "Failed": "",
-    "Failed to connect to device": "",
-    "Failed to disable adaptive trigger": "",
-    "Failed to set speaker tone": "",
-    "Failed to set vibration": "",
-    "Feel for vibration in the controller.": "",
-    "Haptic Vibration": "",
-    "Headphone Jack": "",
-    "Increase non-circularity": "",
-    "Instructions": "",
-    "Keep rotating the sticks even if you see no progress!": "",
-    "Learn more...": "",
-    "Lights": "",
-    "Listen for a tone from the controller speaker.": "",
-    "Long-press [circle] to skip ahead.": "",
-    "Microphone": "",
-    "Microphone Level:": "",
-    "No controller connected": "",
-    "No tests completed yet.": "",
-    "Not tested": "",
-    "Pass": "",
-    "Passed": "",
-    "Plug in headphones to the 3.5mm jack": "",
-    "Press L2 and R2 triggers to feel the trigger resistance.": "",
-    "Press [circle] to close, or [square] to start over": "",
-    "Press [square] to Pass, [cross] to Fail, or [circle] to skip.": "",
-    "Press [square] to begin or [circle] to close": "",
-    "Press [triangle] to go back.": "",
-    "Press each button until they turn green.": "",
-    "Progress": "",
-    "Quick Test": "",
-    "Quick calibrate": "",
-    "Range calibration appears to have failed. Please try again and make sure you rotate the sticks.": "",
-    "Repeat": "",
-    "Restart": "",
-    "Rotate the sticks slowly at least 2 times in one direction and 2 times in the other direction to cover the whole range.": "",
-    "Run through these tests to verify your controller's functionality.": "",
-    "Sony controllers come from the factory calibrated to have an average circularity error of nearly 10 %, and this is now what games expect. Too perfect circularity can make movements and aim feel stiff and unresponsive in some games.": "",
-    "Speaker": "",
-    "Step size": "",
-    "Test Speaker": "",
-    "Test Summary": "",
-    "Test all buttons, or long-press [square] to Pass and [cross] to Fail, or [circle] to skip.": "",
-    "The <b>Done</b> button will unlock after at most 15 seconds. If you press <b>Done</b> without rotating the sticks, the calibration will be incomplete and you will need to repeat it.": "",
-    "This test checks all controller buttons by requiring you to press each button up to three times.": "",
-    "This test checks the headphone jack functionality.": "",
-    "This test checks the reliability of the USB port.": "",
-    "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "",
-    "This test will enable heavy resistance on both L2 and R2 triggers.": "",
-    "USB Connector": "",
-    "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "",
-    "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "",
-    "Wiggle the USB cable to see if the controller disconnects.": "",
-    "failed": "",
-    "hide": "",
-    "passed": "",
-    "skipped": "",
-    "tests completed": "",
-    "to increase the non-circularity.": "",
+    "<strong>Average circularity error:</strong> smaller is not always better! Aim for 7-9 %.": "<strong>Gennemsnitlig cirkularitetsfejl:</strong> mindre er ikke altid bedre! Sigt efter 7-9 %.",
+    "A reboot is needed to continue using this DualSense Edge. Please disconnect and reconnect your controller.": "En genstart er nødvendig for at fortsætte med at bruge denne DualSense Edge. Afbryd forbindelsen til controlleren, og tilslut den igen.",
+    "Adaptive Trigger": "Adaptiv aftrækker",
+    "Adaptive triggers are only supported on DualSense controllers": "Adaptive aftrækkere understøttes kun på DualSense-controllere.",
+    "Add test": "Tilføj test",
+    "Be gentle to avoid damage.": "Vær forsigtig for at undgå skader.",
+    "Buttons": "Knapper",
+    "Center": "Centrer",
+    "Circularity": "Cirkularitet",
+    "Click \"Test Speaker\" to listen for the tone through the headphones": "Klik på \"Test Højttaler\" for at høre tonen gennem hovedtelefonerne.",
+    "Controller does not support adaptive trigger control": "Controlleren understøtter ikke kontrol af adaptive aftrækkere.",
+    "Don't show again": "Vis ikke igen",
+    "Fail": "Fejl",
+    "Failed": "Mislykkedes",
+    "Failed to connect to device": "Kunne ikke oprette forbindelse til enheden.",
+    "Failed to disable adaptive trigger": "Kunne ikke deaktivere adaptiv aftrækker.",
+    "Failed to set speaker tone": "Kunne ikke indstille højttalertone.",
+    "Failed to set vibration": "Kunne ikke indstille vibration.",
+    "Feel for vibration in the controller.": "Mærk efter vibration i controlleren.",
+    "Haptic Vibration": "Haptisk vibration",
+    "Headphone Jack": "Hovedtelefonstik",
+    "Increase non-circularity": "Øg ikke-cirkulariteten",
+    "Instructions": "Instruktioner",
+    "Keep rotating the sticks even if you see no progress!": "Bliv ved med at dreje pindene, selvom du ikke ser nogen fremgang!",
+    "Learn more...": "Læs mere",
+    "Lights": "Lys",
+    "Listen for a tone from the controller speaker.": "Lyt efter en tone fra controllerens højttaler.",
+    "Long-press [circle] to skip ahead.": "Tryk og hold [circle] nede for at springe fremad.",
+    "Microphone": "Mikrofon",
+    "Microphone Level:": "Mikrofonniveau:",
+    "No controller connected": "Ingen controller tilsluttet",
+    "No tests completed yet.": "Ingen tests er færdige endnu.",
+    "Not tested": "Ikke testet",
+    "Pass": "Godkend",
+    "Passed": "Godkendt",
+    "Plug in headphones to the 3.5mm jack": "Tilslut hovedtelefoner til 3,5 mm-stikket.",
+    "Press L2 and R2 triggers to feel the trigger resistance.": "Tryk på L2- og R2-aftrækkere for at mærke aftrækkerens modstand.",
+    "Press [circle] to close, or [square] to start over": "Tryk på [circle] for at lukke, eller [square] for at starte forfra.",
+    "Press [square] to Pass, [cross] to Fail, or [circle] to skip.": "Tryk på [square] for at godkende, [cross] for at fejle, eller [circle] for at springe over.",
+    "Press [square] to begin or [circle] to close": "Tryk på [square] for at starte eller [circle] for at lukke.",
+    "Press [triangle] to go back.": "Tryk på [triangle] for at gå tilbage.",
+    "Press each button until they turn green.": "Tryk på hver knap, indtil den bliver grøn.",
+    "Progress": "Fremgang",
+    "Quick Test": "Hurtig Test",
+    "Quick calibrate": "Hurtig kalibrering",
+    "Range calibration appears to have failed. Please try again and make sure you rotate the sticks.": "Kalibrering af rækkevidde ser ud til at være mislykket. Prøv igen, og sørg for at dreje pindene.",
+    "Repeat": "Gentag",
+    "Restart": "Genstart",
+    "Rotate the sticks slowly at least 2 times in one direction and 2 times in the other direction to cover the whole range.": "Drej pinde langsomt mindst 2 gange i den ene retning og 2 gange i den anden retning for at dække hele bevægelsesområdet.",
+    "Run through these tests to verify your controller's functionality.": "Gennemfør disse tests for at verificere, at din controller fungerer korrekt.",
+    "Sony controllers come from the factory calibrated to have an average circularity error of nearly 10 %, and this is now what games expect. Too perfect circularity can make movements and aim feel stiff and unresponsive in some games.": "Sony-controllere leveres fra fabrikken kalibreret med en gennemsnitlig cirkularitetsfejl på næsten 10 %, og det er nu det, spil forventer. For perfekt cirkularitet kan få bevægelser og sigte til at føles stive og uresponsive i nogle spil.",
+    "Speaker": "Højttaler",
+    "Step size": "Trinstørrelse",
+    "Test Speaker": "Test højttaler",
+    "Test Summary": "Testoversigt",
+    "Test all buttons, or long-press [square] to Pass and [cross] to Fail, or [circle] to skip.": "Test alle knapper, eller tryk og hold [square] for at godkende, [cross] for at fejle, eller [circle] for at springe over.",
+    "The <b>Done</b> button will unlock after at most 15 seconds. If you press <b>Done</b> without rotating the sticks, the calibration will be incomplete and you will need to repeat it.": "<b>Færdig</b>-knappen vil blive tilgængelig efter højst 15 sekunder. Hvis du trykker på <b>Færdig</b> uden at dreje pindene, vil kalibreringen være ufuldstændig, og du bliver nødt til at gentage den.",
+    "This test checks all controller buttons by requiring you to press each button up to three times.": "Denne test kontrollerer alle controllerens knapper ved at kræve, at du trykker på hver knap op til tre gange.",
+    "This test checks the headphone jack functionality.": "Denne test kontrollerer hovedtelefonstikkens funktionalitet.",
+    "This test checks the reliability of the USB port.": "Denne test kontrollerer USB-portens pålidelighed.",
+    "This test will activate the controller's vibration motors, first the heavy one, and then the light one.": "Denne test vil aktivere controllerens vibrationsmotorer, først den kraftige og derefter den lette.",
+    "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "Denne test vil skifte mellem rødt, grønt og blåt på controllerens lysbjælke, animere spillerindikatorlysene og blinke med mute-knappen.",
+    "This test will enable heavy resistance on both L2 and R2 triggers.": "Denne test vil aktivere stærk modstand på både L2- og R2-aftrækkere.",
+    "This test will play a tone through the controller's built-in speaker.": "Denne test vil afspille en tone gennem controllerens indbyggede højttaler.",
+    "USB Connector": "USB-stik",
+    "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "Se controllerens lys skifte farve, spillerlysene animere og mute-knappen blinke.",
+    "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "Mens du holder den pind, der skal justeres, lige op/ned/venstre/højre, foretag justeringer, indtil du ser lyseblå sektorer i alle fire retninger efter at have cirklet pinden både til venstre og højre. Brug derefter...",
+    "Wiggle the USB cable to see if the controller disconnects.": "Vrik med USB-kablet for at se, om controlleren afbrydes.",
+    "failed": "fejlet",
+    "hide": "skjul",
+    "passed": "godkendt",
+    "skipped": "sprunget over",
+    "tests completed": "tests er gennemført",
+    "to increase the non-circularity.": "for at øge ikke-cirkulariteten.",
     "": ""
 }
\ No newline at end of file