From 33a937aff20545dd4b188fd9551b5e5aaecb35ba Mon Sep 17 00:00:00 2001 From: Jarnostuff Date: Fri, 6 Mar 2026 00:34:51 +0100 Subject: [PATCH 1/3] Updated Dutch translations and added additional author credit --- lang/nl_nl.json | 424 ++++++++++++++++++++++++------------------------ 1 file changed, 212 insertions(+), 212 deletions(-) diff --git a/lang/nl_nl.json b/lang/nl_nl.json index 5683db1..1bd6346 100644 --- a/lang/nl_nl.json +++ b/lang/nl_nl.json @@ -1,5 +1,5 @@ { - ".authorMsg": "Vertaald door Notedop", + ".authorMsg": "Vertaald door Notedop en Jarnostuff.", "DualShock Calibration GUI": "DualShock Kalibratie GUI", "Connect": "Verbinden", "Connected to:": "Verbonden met:", @@ -124,216 +124,216 @@ "Please update the firmware and try again.": "Update de firmware en probeer het opnieuw.", "Joystick Info": "Joystick Info", "Check circularity": "Controleer de circulariteit", - "(Dualsense) Will updating the firmware reset calibration?": "", - "(beta)": "", - "10x zoom": "", - "30th Anniversary": "", - "Externally: by applying +1.8V directly to the visible test point without opening the controller.": "", - "Internally: by soldering a wire from a +1.8V source to the write-protect TP.": "", - "Average circularity error: smaller is not always better! Aim for 7-9 %.": "", - "A reboot is needed to continue using this DualSense Edge. Please disconnect and reconnect your controller.": "", - "Adaptive Trigger": "", - "Adaptive triggers are only supported on DualSense controllers": "", - "Add test": "", - "After range calibration, joysticks always go in corners.": "", - "After they have been replaced, this utility can be used to calibrate the controller to work with the new joysticks.": "", - "Aim for a circularity error of around 7-9 % for the best playing experience.": "", - "Astro Bot": "", - "Battery Barcode": "", - "Battery level is low. Tests may fail due to the controller being in power saving mode.": "", - "Be gentle to avoid damage.": "", - "Bluetooth Address": "", - "Buttons": "", - "Calibrating without replacing the joysticks may help temporarily, but it may also make the problem worse, with no way to undo it.": "", - "Calibration": "", - "Calibration History": "", - "Calibration is being stored in the stick modules.": "", - "Can I reset a permanent calibration to previous calibration?": "", - "Can you overwrite a permanent calibration?": "", - "Cancel": "", - "Cannot copy text to the clipboard:": "", - "Cannot lock": "", - "Cannot read module barcodes": "", - "Cannot store data into": "", - "Cannot unlock": "", - "Center": "", - "Center (L1)": "", - "Changes saved successfully": "", - "Chroma Indigo": "", - "Chroma Pearl": "", - "Chroma Teal": "", - "Circularity": "", - "Circularity (R1)": "", - "Clear All": "", - "Cobalt Blue": "", - "Color": "", - "Controller Info": "", - "Controller does not support adaptive trigger control": "", - "Cosmic Red": "", - "Current": "", - "Debug": "", - "Debug Info": "", - "Debug buttons": "", - "Delete": "", - "Delete all calibration history for this controller? This cannot be undone.": "", - "Delete this calibration entry?": "", - "Does this software resolve stickdrift?": "", - "Don't show again": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", - "DualSense Edge Calibration": "", - "Error while saving changes": "", - "FW Build Date": "", - "FW Series": "", - "FW Type": "", - "FW Update": "", - "FW Update Info": "", - "FW Version": "", - "Fail": "", - "Failed": "", - "Failed to connect to device": "", - "Failed to disable adaptive trigger": "", - "Failed to set speaker tone": "", - "Failed to set vibration": "", - "Feel for vibration in the controller.": "", - "Finetune stick calibration": "", - "Firefox is supported with the WebHID extension installed.": "", - "For more info or help, feel free to reach out on Discord.": "", - "Fortnite": "", - "Galactic Purple": "", - "God of War Ragnarok": "", - "Grey Camouflage": "", - "HW Model": "", - "Haptic Vibration": "", - "Hardware": "", - "Headphone Jack": "", - "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "", - "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "", - "Increase non-circularity": "", - "Info": "", - "Instructions": "", - "It appears the latest joystick calibration has not been saved.": "", - "Keep rotating the sticks even if you see no progress!": "", - "Last connected": "", - "Learn more...": "", - "Left Module Barcode": "", - "Left stick": "", - "Lights": "", - "Listen for a tone from the controller speaker.": "", - "Long-press [circle] to skip ahead.": "", - "MCU Unique ID": "", - "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "", - "Microphone": "", - "Microphone Level:": "", - "Midnight Black": "", - "More details and images": "", - "Move the stick to select it for tuning, then without touching the stick use the D-pad buttons to adjust the center point. Flick it and adjust it again if it is off center or flickers.": "", - "No controller connected": "", - "No saved calibrations found.": "", - "No tests completed yet.": "", - "No.": "", - "Normal": "", - "Not tested": "", - "Nova Pink": "", - "Only after you have done that, you click on \"Done\".": "", - "PCBA ID": "", - "Pass": "", - "Passed": "", - "Please connect a DualShock 4, a DualSense, DualSense Edge or VR2 controller to your computer and press Connect.": "", - "Please note: the stick modules on the DS Edge cannot be calibrated via software alone.": "", - "Please read the instructions.": "", - "Please release the stick to center position before adjusting with D-pad buttons.": "", - "Please use a web browser with WebHID support (e.g. Google Chrome or Microsoft Edge) on a PC or Mac.": "", - "Plug in headphones to the 3.5mm jack": "", - "Press L2 and R2 triggers to feel the trigger resistance.": "", - "Press [circle] to close, or [square] to start over": "", - "Press [square] to Pass, [cross] to Fail, or [circle] to skip.": "", - "Press [square] to begin or [circle] to close": "", - "Press [triangle] to go back.": "", - "Press each button until they turn green.": "", - "Press the D-pad or face buttons in the direction you want the stick position to move.": "", - "Progress": "", - "Push the stick straight up/down/left/right as far as possible.": "", - "Quick Test": "", - "Quick calibrate": "", - "Range calibration appears to have failed. Please try again and make sure you rotate the sticks.": "", - "Reboot controller": "", - "Repeat": "", - "Restart": "", - "Restore": "", - "Restore calibration": "", - "Right Module Barcode": "", - "Right stick": "", - "Rotate the sticks slowly at least 2 times in one direction and 2 times in the other direction to cover the whole range.": "", - "Run through these tests to verify your controller's functionality.": "", - "SBL FW Version": "", - "Save changes permanently": "", - "Serial Number": "", - "Show all": "", - "Show raw numbers": "", - "Software": "", - "Sony controllers come from the factory calibrated to have an average circularity error of nearly 10 %, and this is now what games expect. Too perfect circularity can make movements and aim feel stiff and unresponsive in some games.": "", - "Speaker": "", - "Spider FW Version": "", - "Spider-Man 2": "", - "Starlight Blue": "", - "Step size": "", - "Sterling Silver": "", - "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "", - "Support for calibrating DualSense Edge stick modules is now available as an experimental feature.": "", - "Test Speaker": "", - "Test Summary": "", - "Test all buttons, or long-press [square] to Pass and [cross] to Fail, or [circle] to skip.": "", - "The Done button will unlock after at most 15 seconds. If you press Done without rotating the sticks, the calibration will be incomplete and you will need to repeat it.": "", - "The Last of Us": "", - "The calibration was restored successfully! Remember to save the changes in order not to loose them when the controller is rebooted.": "", - "The device appears to be a clone. All calibration functionality is disabled.": "", - "The device is connected via Bluetooth. Disconnect and reconnect using a USB cable instead.": "", - "The item has been copied to the clipboard.": "", - "This controller has unsaved changes that will be lost when the controller is rebooted.": "", - "This involves temporarily disabling write protection by applying +1.8V to a specific test point on each module.": "", - "This is only for advanced users. If you're not sure what you're doing, please do not attempt it.": "", - "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "", - "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "", - "This test checks all controller buttons by requiring you to press each button up to three times.": "", - "This test checks the headphone jack functionality.": "", - "This test checks the reliability of the USB port.": "", - "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", - "This test will enable heavy resistance on both L2 and R2 triggers.": "", - "This utility cannot fix stick drift.": "", - "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", - "Touchpad FW Version": "", - "Touchpad ID": "", - "USB Connector": "", - "Unsupported browser.": "", - "Use expert mode": "", - "Use four-step calibration": "", - "Use normal mode": "", - "Use quick calibration": "", - "Using this utility on a phone or tablet is not supported.": "", - "VCM Left Barcode": "", - "VCM Right Barcode": "", - "Values": "", - "Venom FW Version": "", - "Volcanic Red": "", - "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", - "We are not responsible for any damage caused by attempting this modification.": "", - "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "", - "White": "", - "Wiggle the USB cable to see if the controller disconnects.": "", - "Yes. Simply do another permanent calibration.": "", - "You can do this in two ways:": "", - "You have to rotate the joysticks before you press \"Done\".": "", - "You should save your changes, or reboot the controller to revert back to the previous state.": "", - "Your device might not be a genuine Sony controller. If it is not a clone then please report this issue.": "", - "failed": "", - "here": "", - "hide": "", - "left module": "", - "passed": "", - "right module": "", - "serial number": "", - "skipped": "", - "tests completed": "", - "to increase the non-circularity.": "", + "(Dualsense) Will updating the firmware reset calibration?": "(Dualsense) Wordt de kalibratie gereset als ik de firmware update?", + "(beta)": "(beta)", + "10x zoom": "10x zoom", + "30th Anniversary": "30-jarig Jubileum", + "Externally: by applying +1.8V directly to the visible test point without opening the controller.": "Extern: door +1,8 V rechtstreeks op het zichtbare testpunt aan te sluiten zonder de controller te openen.", + "Internally: by soldering a wire from a +1.8V source to the write-protect TP.": "Intern: door een draad van een +1,8 V-bron naar het write-protect-testpunt te solderen.", + "Average circularity error: smaller is not always better! Aim for 7-9 %.": "Gemiddelde circulariteitsfout: kleiner is niet altijd beter! Streef naar 7-9 %.", + "A reboot is needed to continue using this DualSense Edge. Please disconnect and reconnect your controller.": "Er is een herstart nodig om deze DualSense Edge te kunnen blijven gebruiken. Koppel uw controller los en sluit hem opnieuw aan.", + "Adaptive Trigger": "Adaptieve Trigger", + "Adaptive triggers are only supported on DualSense controllers": "Adaptieve triggers worden alleen ondersteund op DualSense-controllers.", + "Add test": "Test toevoegen", + "After range calibration, joysticks always go in corners.": "Na kalibratie van het bereik gaan joysticks altijd naar de hoeken.", + "After they have been replaced, this utility can be used to calibrate the controller to work with the new joysticks.": "Nadat ze zijn vervangen, kan dit programma worden gebruikt om de controller te kalibreren zodat deze met de nieuwe joysticks werkt.", + "Aim for a circularity error of around 7-9 % for the best playing experience.": "Streef naar een circulariteitsfout van ongeveer 7-9 % voor de beste speelervaring.", + "Astro Bot": "Astro Bot", + "Battery Barcode": "Batterijbarcode", + "Battery level is low. Tests may fail due to the controller being in power saving mode.": "Het batterijniveau is laag. Testen kunnen mislukken omdat de controller in de energiebesparingsmodus staat.", + "Be gentle to avoid damage.": "Wees voorzichtig om schade te voorkomen.", + "Bluetooth Address": "Bluetooth-adres", + "Buttons": "Knoppen", + "Calibrating without replacing the joysticks may help temporarily, but it may also make the problem worse, with no way to undo it.": "Kalibreren zonder de joysticks te vervangen kan tijdelijk helpen, maar het kan het probleem ook verergeren, waardoor het niet meer ongedaan kan worden gemaakt.", + "Calibration": "Kalibratie", + "Calibration History": "Kalibratiegeschiedenis", + "Calibration is being stored in the stick modules.": "De kalibratie wordt opgeslagen in de stickmodules.", + "Can I reset a permanent calibration to previous calibration?": "Kan ik een permanente kalibratie terugzetten naar de vorige kalibratie?", + "Can you overwrite a permanent calibration?": "Kunt u een permanente kalibratie overschrijven?", + "Cancel": "Annuleren", + "Cannot copy text to the clipboard:": "Kan geen tekst naar het klembord kopiëren:", + "Cannot lock": "Kan niet vergrendelen", + "Cannot read module barcodes": "Kan modulebarcodes niet lezen", + "Cannot store data into": "Kan geen gegevens opslaan in", + "Cannot unlock": "Kan niet ontgrendelen", + "Center": "Midden", + "Center (L1)": "Midden (L1)", + "Changes saved successfully": "Wijzigingen succesvol opgeslagen", + "Chroma Indigo": "Chroma Indigo", + "Chroma Pearl": "Chroma Pearl", + "Chroma Teal": "Chroma Teal", + "Circularity": "Circulariteit", + "Circularity (R1)": "Circulariteit (R1)", + "Clear All": "Alles Wissen", + "Cobalt Blue": "Cobalt Blue", + "Color": "Kleur", + "Controller Info": "Controllerinformatie", + "Controller does not support adaptive trigger control": "Controller ondersteunt geen adaptieve triggerbesturing", + "Cosmic Red": "Cosmic Red", + "Current": "Huidig", + "Debug": "Debug", + "Debug Info": "Debug-informatie", + "Debug buttons": "Debug-knoppen", + "Delete": "Verwijderen", + "Delete all calibration history for this controller? This cannot be undone.": "Wilt u alle kalibratiegegevens voor deze controller verwijderen? Dit kan niet ongedaan worden gemaakt.", + "Delete this calibration entry?": "Dit kalibratie-item verwijderen?", + "Does this software resolve stickdrift?": "Lost deze software stickdrift op?", + "Don't show again": "Niet meer weergeven", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "Drift wordt veroorzaakt door slijtage van mechanische onderdelen in de joystick. Deze moeten worden vervangen om de drift te herstellen.", + "DualSense Edge Calibration": "DualSense Edge Kalibratie", + "Error while saving changes": "Fout tijdens het opslaan van wijzigingen", + "FW Build Date": "FW Build Date", + "FW Series": "FW Series", + "FW Type": "FW Type", + "FW Update": "FW Update", + "FW Update Info": "FW Update Info", + "FW Version": "FW Version", + "Fail": "Mislukt", + "Failed": "Mislukt", + "Failed to connect to device": "Kan geen verbinding maken met het apparaat", + "Failed to disable adaptive trigger": "Mislukt om adaptieve trigger uit te schakelen", + "Failed to set speaker tone": "Kan de luidsprekertoon niet instellen", + "Failed to set vibration": "Mislukt om trilling in te stellen", + "Feel for vibration in the controller.": "Voel of de controller trilt.", + "Finetune stick calibration": "Stickkalibratie nauwkeurig afstellen", + "Firefox is supported with the WebHID extension installed.": "Firefox wordt ondersteund met de WebHID-extensie geïnstalleerd.", + "For more info or help, feel free to reach out on Discord.": "Neem voor meer informatie of hulp gerust contact op via Discord.", + "Fortnite": "Fortnite", + "Galactic Purple": "Galactic Purple", + "God of War Ragnarok": "God of War Ragnarok", + "Grey Camouflage": "Grey Camouflage", + "HW Model": "HW Model", + "Haptic Vibration": "Haptische Vibratie", + "Hardware": "Hardware", + "Headphone Jack": "Headphone Jack", + "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "Ik heb gemerkt dat sommige controllers uit de doos een slechtere fabriekskalibratie hebben dan wanneer ik ze opnieuw zou kalibreren. Dit geldt vooral voor de circulariteit van SCUF-controllers met een unieke buitenkant.", + "If the calibration is not stored permanently, please double-check the wirings of the hardware mod.": "Als de kalibratie niet permanent wordt opgeslagen, controleer dan nogmaals de kabels van de hardwaremodificatie.", + "Increase non-circularity": "Verhoog de niet-circulariteit", + "Info": "Informatie", + "Instructions": "Instructies", + "It appears the latest joystick calibration has not been saved.": "Het lijkt erop dat de laatste joystickkalibratie niet is opgeslagen.", + "Keep rotating the sticks even if you see no progress!": "Blijf de sticks draaien, ook al ziet u geen vooruitgang!", + "Last connected": "Laatst verbonden", + "Learn more...": "Lees meer...", + "Left Module Barcode": "Linker Modulebarcode", + "Left stick": "Linker stick", + "Lights": "Lichten", + "Listen for a tone from the controller speaker.": "Luister of er een toon uit de luidspreker van de controller komt.", + "Long-press [circle] to skip ahead.": "Houd [cirkel] ingedrukt om door te gaan.", + "MCU Unique ID": "MCU unieke ID", + "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "Zorg ervoor dat u de randen van het joystickframe aanraakt en deze langzaam draait, bij voorkeur in beide richtingen - met de klok mee en tegen de klok in.", + "Microphone": "Microfoon", + "Microphone Level:": "Microfoonniveau:", + "Midnight Black": "Midnight Black", + "More details and images": "Meer details en afbeeldingen", + "Move the stick to select it for tuning, then without touching the stick use the D-pad buttons to adjust the center point. Flick it and adjust it again if it is off center or flickers.": "Beweeg de stick om deze te selecteren voor het afstellen, vervolgens zonder de stick aan te raken gebruikt u de D-pad knoppen om het middelpunt aan te passen. Beweeg de stick en pas deze opnieuw aan als deze niet in het midden staat of flikkert.", + "No controller connected": "Geen controller verbonden", + "No saved calibrations found.": "Geen opgeslagen kalibraties gevonden.", + "No tests completed yet.": "Nog geen testen voltooid.", + "No.": "Nee.", + "Normal": "Normaal", + "Not tested": "Niet getest", + "Nova Pink": "Nova Pink", + "Only after you have done that, you click on \"Done\".": "Pas nadat u dat hebt gedaan, klikt u op \"Gereed\".", + "PCBA ID": "PCBA ID", + "Pass": "Geslaagd", + "Passed": "Geslaagd", + "Please connect a DualShock 4, a DualSense, DualSense Edge or VR2 controller to your computer and press Connect.": "Sluit een DualShock 4, DualSense, DualSense Edge of VR2 controller aan op uw computer en druk op Verbinden.", + "Please note: the stick modules on the DS Edge cannot be calibrated via software alone.": "Let op: de stickmodules op de DS Edge kunnen niet alleen via software worden gekalibreerd.", + "Please read the instructions.": "Lees alstublieft de instructies.", + "Please release the stick to center position before adjusting with D-pad buttons.": "Laat de stick eerst los zodat deze terugkeert naar de middenpositie voordat u aanpassingen doet met de D-pad-knoppen.", + "Please use a web browser with WebHID support (e.g. Google Chrome or Microsoft Edge) on a PC or Mac.": "Gebruik een webbrowser met WebHID-ondersteuning (bijvoorbeeld Google Chrome of Microsoft Edge) op een pc of Mac.", + "Plug in headphones to the 3.5mm jack": "Sluit een hoofdtelefoon aan op de 3,5 mm-aansluiting.", + "Press L2 and R2 triggers to feel the trigger resistance.": "Druk op L2 en R2 om de weerstand van de trigger te voelen.", + "Press [circle] to close, or [square] to start over": "Druk op [cirkel] om te sluiten, of op [vierkant] om opnieuw te beginnen.", + "Press [square] to Pass, [cross] to Fail, or [circle] to skip.": "Druk op [vierkant] om goed te keuren, [kruis] om af te keuren of [cirkel] om over te slaan.", + "Press [square] to begin or [circle] to close": "Druk op [vierkant] om te beginnen of op [cirkel] om te sluiten.", + "Press [triangle] to go back.": "Druk op [driehoek] om terug te gaan.", + "Press each button until they turn green.": "Druk op elke knop totdat ze groen worden.", + "Press the D-pad or face buttons in the direction you want the stick position to move.": "Druk op de D-pad of de knoppen in de richting waarin u de stick wilt bewegen.", + "Progress": "Voortgang", + "Push the stick straight up/down/left/right as far as possible.": "Duw de stick zo ver mogelijk omhoog/omlaag/naar links/naar rechts.", + "Quick Test": "Snelle test", + "Quick calibrate": "Snel kalibreren", + "Range calibration appears to have failed. Please try again and make sure you rotate the sticks.": "De bereikkalibratie lijkt mislukt te zijn. Probeer het opnieuw en zorg ervoor dat u de sticks ronddraait.", + "Reboot controller": "Controller opnieuw opstarten", + "Repeat": "Herhalen", + "Restart": "Opnieuw starten", + "Restore": "Herstellen", + "Restore calibration": "Kalibratie herstellen", + "Right Module Barcode": "Rechter module Barcode", + "Right stick": "Rechter stick", + "Rotate the sticks slowly at least 2 times in one direction and 2 times in the other direction to cover the whole range.": "Draai de sticks langzaam minstens 2 keer in de ene richting en 2 keer in de andere richting om het hele bereik te dekken.", + "Run through these tests to verify your controller's functionality.": "Voer deze testen uit om de functionaliteit van uw controller te controleren.", + "SBL FW Version": "SBL FW Versie", + "Save changes permanently": "Wijzigingen permanent opslaan", + "Serial Number": "Serienummer", + "Show all": "Alles weergeven", + "Show raw numbers": "Ruwe waarden tonen", + "Software": "Software", + "Sony controllers come from the factory calibrated to have an average circularity error of nearly 10 %, and this is now what games expect. Too perfect circularity can make movements and aim feel stiff and unresponsive in some games.": "Sony-controllers worden in de fabriek gekalibreerd met een gemiddelde circulariteitsfout van bijna 10 %, en dit is nu wat games verwachten. Een te perfecte circulariteit kan ervoor zorgen dat bewegingen en richten in sommige games stijf en traag aanvoelen.", + "Speaker": "Luidspreker", + "Spider FW Version": "Spider FW Versie", + "Spider-Man 2": "Spider-Man 2", + "Starlight Blue": "Starlight Blue", + "Step size": "Stapgrootte", + "Sterling Silver": "Sterling Silver", + "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "Stickdrift wordt veroorzaakt door een fysiek defect, namelijk vuil, een versleten potentiometer of in sommige gevallen een versleten veer.", + "Support for calibrating DualSense Edge stick modules is now available as an experimental feature.": "Ondersteuning voor het kalibreren van DualSense Edge-stickmodules is nu beschikbaar als een experimentele functie.", + "Test Speaker": "Luidspreker testen", + "Test Summary": "Samenvatting van de test", + "Test all buttons, or long-press [square] to Pass and [cross] to Fail, or [circle] to skip.": "Test alle knoppen, of druk lang op [vierkant] om te slagen en [kruis] om te mislukken, of [cirkel] om over te slaan.", + "The Done button will unlock after at most 15 seconds. If you press Done without rotating the sticks, the calibration will be incomplete and you will need to repeat it.": "De knop Gereed wordt na maximaal 15 seconden ontgrendeld. Als u op Gereed drukt zonder de sticks te draaien, is de kalibratie onvolledig en moet u deze herhalen.", + "The Last of Us": "The Last of Us", + "The calibration was restored successfully! Remember to save the changes in order not to loose them when the controller is rebooted.": "De kalibratie is succesvol teruggezet! Vergeet niet de wijzigingen op te slaan, zodat ze niet verloren gaan wanneer de controller opnieuw wordt opgestart.", + "The device appears to be a clone. All calibration functionality is disabled.": "Het apparaat lijkt een kloon te zijn. Alle kalibratiefuncties zijn uitgeschakeld.", + "The device is connected via Bluetooth. Disconnect and reconnect using a USB cable instead.": "Het apparaat is verbonden via Bluetooth. Verbreek de verbinding en maak opnieuw verbinding met een USB-kabel.", + "The item has been copied to the clipboard.": "Het item is gekopieerd naar het klembord.", + "This controller has unsaved changes that will be lost when the controller is rebooted.": "Deze controller bevat niet-opgeslagen wijzigingen die verloren zullen gaan wanneer de controller opnieuw wordt opgestart.", + "This involves temporarily disabling write protection by applying +1.8V to a specific test point on each module.": "Hiervoor moet de schrijfbeveiliging tijdelijk worden uitgeschakeld door +1,8 V toe te passen op een specifiek testpunt op elke module.", + "This is only for advanced users. If you're not sure what you're doing, please do not attempt it.": "Dit is alleen voor gevorderde gebruikers. Als u niet zeker weet wat u doet, probeer dit dan alsjeblieft niet.", + "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "Dit probleem doet zich voor omdat u direct na het starten van een bereikkalibratie op \"Gereed\" hebt geklikt.", + "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "Deze software lost stickdrift niet op als u daar al last van heeft. Wat het wel doet, is ervoor zorgen dat de nieuwe joystick(s) goed functioneren nadat u de oude hebt vervangen, zodat ze goed werken.", + "This test checks all controller buttons by requiring you to press each button up to three times.": "Deze test controleert alle knoppen van de controller waarbij u elke knop drie keer moet indrukken.", + "This test checks the headphone jack functionality.": "Deze test controleert de functionaliteit van de koptelefoonaansluiting.", + "This test checks the reliability of the USB port.": "Deze test controleert de betrouwbaarheid van de USB-poort.", + "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "Deze test laat de kleuren rood, groen en blauw op de lichtbalk van de controller zien, laat de lichtjes van de spelersindicator oplichten en laat de mute-knop knipperen.", + "This test will enable heavy resistance on both L2 and R2 triggers.": "Deze test schakelt een sterke weerstand in op zowel de L2- als de R2-trigger.", + "This utility cannot fix stick drift.": "Dit programma kan stickdrift niet oplossen.", + "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "Om een aangepaste kalibratie op te slaan in het interne geheugen van de stick, is een hardwareaanpassing vereist.", + "Touchpad FW Version": "Touchpad FW Versie", + "Touchpad ID": "Touchpad ID", + "USB Connector": "USB-aansluiting", + "Unsupported browser.": "Browser wordt niet ondersteund.", + "Use expert mode": "Gebruik expertmodus", + "Use four-step calibration": "Gebruik vierstaps kalibratie", + "Use normal mode": "Gebruik normale modus", + "Use quick calibration": "Gebruik snelle kalibratie", + "Using this utility on a phone or tablet is not supported.": "Het gebruik van dit programma op een telefoon of tablet wordt niet ondersteund.", + "VCM Left Barcode": "VCM linker barcode", + "VCM Right Barcode": "VCM rechter barcode", + "Values": "Waarden", + "Venom FW Version": "Venom FW Versie", + "Volcanic Red": "Volcanic Red", + "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "Bekijk hoe de lampjes op de controller van kleur veranderen, de spelerslampjes oplichten en de mute-knop knippert.", + "We are not responsible for any damage caused by attempting this modification.": "Wij zijn niet verantwoordelijk voor schade die wordt veroorzaakt door het uitvoeren van deze wijziging.", + "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "Terwijl u de stick recht omhoog/omlaag/naar links/naar rechts houdt, pas u de instellingen aan totdat u lichtblauwe sectoren in alle vier de richtingen ziet nadat u de stick zowel naar links als naar rechts hebt gedraaid. Gebruik vervolgens de", + "White": "Wit", + "Wiggle the USB cable to see if the controller disconnects.": "Beweeg de USB-kabel heen en weer om te zien of de controller losraakt.", + "Yes. Simply do another permanent calibration.": "Ja. Voer gewoon nog een permanente kalibratie uit.", + "You can do this in two ways:": "U kunt dit op twee manieren doen:", + "You have to rotate the joysticks before you press \"Done\".": "U moet de joysticks draaien voordat u op \"Gereed\" drukt.", + "You should save your changes, or reboot the controller to revert back to the previous state.": "U moet uw wijzigingen opslaan of de controller opnieuw opstarten om terug te keren naar de vorige status.", + "Your device might not be a genuine Sony controller. If it is not a clone then please report this issue.": "Uw apparaat is mogelijk geen originele Sony-controller. Als het geen kloon is, meld dit probleem dan.", + "failed": "mislukt", + "here": "hier", + "hide": "verbergen", + "left module": "linker module", + "passed": "geslaagd", + "right module": "rechter module", + "serial number": "serienummer", + "skipped": "overgeslagen", + "tests completed": "testen voltooid", + "to increase the non-circularity.": "om de niet-circulariteit te vergroten.", "": "" } \ No newline at end of file From 637c66818b1f1cb874ffa838cac85ddde85f17c7 Mon Sep 17 00:00:00 2001 From: Jarno Hennes <44522036+Jarnostuff@users.noreply.github.com> Date: Fri, 6 Mar 2026 09:34:37 +0100 Subject: [PATCH 2/3] Update lang/nl_nl.json type error fix Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- lang/nl_nl.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lang/nl_nl.json b/lang/nl_nl.json index 1bd6346..f5b5701 100644 --- a/lang/nl_nl.json +++ b/lang/nl_nl.json @@ -317,7 +317,7 @@ "Volcanic Red": "Volcanic Red", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "Bekijk hoe de lampjes op de controller van kleur veranderen, de spelerslampjes oplichten en de mute-knop knippert.", "We are not responsible for any damage caused by attempting this modification.": "Wij zijn niet verantwoordelijk voor schade die wordt veroorzaakt door het uitvoeren van deze wijziging.", - "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "Terwijl u de stick recht omhoog/omlaag/naar links/naar rechts houdt, pas u de instellingen aan totdat u lichtblauwe sectoren in alle vier de richtingen ziet nadat u de stick zowel naar links als naar rechts hebt gedraaid. Gebruik vervolgens de", + "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "Terwijl u de stick recht omhoog/omlaag/naar links/naar rechts houdt, past u de instellingen aan totdat u lichtblauwe sectoren in alle vier de richtingen ziet nadat u de stick zowel naar links als naar rechts hebt gedraaid. Gebruik vervolgens de", "White": "Wit", "Wiggle the USB cable to see if the controller disconnects.": "Beweeg de USB-kabel heen en weer om te zien of de controller losraakt.", "Yes. Simply do another permanent calibration.": "Ja. Voer gewoon nog een permanente kalibratie uit.", From f67a35a92fc56e72dfdeeb9cd2b816120082f031 Mon Sep 17 00:00:00 2001 From: Jarno Hennes <44522036+Jarnostuff@users.noreply.github.com> Date: Fri, 6 Mar 2026 09:35:58 +0100 Subject: [PATCH 3/3] Update lang/nl_nl.json MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Unnecessary “-” removed Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- lang/nl_nl.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lang/nl_nl.json b/lang/nl_nl.json index f5b5701..6845fcd 100644 --- a/lang/nl_nl.json +++ b/lang/nl_nl.json @@ -226,7 +226,7 @@ "Microphone Level:": "Microfoonniveau:", "Midnight Black": "Midnight Black", "More details and images": "Meer details en afbeeldingen", - "Move the stick to select it for tuning, then without touching the stick use the D-pad buttons to adjust the center point. Flick it and adjust it again if it is off center or flickers.": "Beweeg de stick om deze te selecteren voor het afstellen, vervolgens zonder de stick aan te raken gebruikt u de D-pad knoppen om het middelpunt aan te passen. Beweeg de stick en pas deze opnieuw aan als deze niet in het midden staat of flikkert.", + "Move the stick to select it for tuning, then without touching the stick use the D-pad buttons to adjust the center point. Flick it and adjust it again if it is off center or flickers.": "Beweeg de stick om deze te selecteren voor het afstellen, vervolgens zonder de stick aan te raken gebruikt u de D-pad-knoppen om het middelpunt aan te passen. Beweeg de stick en pas deze opnieuw aan als deze niet in het midden staat of flikkert.", "No controller connected": "Geen controller verbonden", "No saved calibrations found.": "Geen opgeslagen kalibraties gevonden.", "No tests completed yet.": "Nog geen testen voltooid.",