diff --git a/lang/ar_ar.json b/lang/ar_ar.json index 9638321..0291eb7 100644 --- a/lang/ar_ar.json +++ b/lang/ar_ar.json @@ -73,7 +73,6 @@ "Calibration in progress": "جارٍ المعايرة", "Start": "بدء", "Continue": "متابعة", - "You can check the calibration with the": "يمكنك التحقق من المعايرة من خلال", "Have a nice day :)": "أتمنى لك يومًا سعيدًا :)", "Welcome to the Calibration GUI": "مرحباً بك في Calibration GUI", "Just few things to know before you can start:": "بعض الأشياء التي يجب أن تعرفها قبل أن تبدأ", @@ -208,6 +207,7 @@ "Cosmic Red": "", "Debug": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "Fail": "", "Failed": "", @@ -295,13 +295,12 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "Volcanic Red": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "We are not responsible for any damage caused by attempting this modification.": "", diff --git a/lang/bg_bg.json b/lang/bg_bg.json index 7a83c71..8892e21 100644 --- a/lang/bg_bg.json +++ b/lang/bg_bg.json @@ -72,7 +72,6 @@ "Calibration in progress": "Калибрация в ход", "Start": "Започни", "Continue": "Продължи", - "You can check the calibration with the": "Можете да проверите калибрацията с", "Have a nice day :)": "Приятен ден! :)", "Welcome to the Calibration GUI": "Добре дошли в Calibration GUI", "Just few things to know before you can start:": "Просто няколко неща, които трябва да знаете, преди да започнете:", @@ -188,6 +187,7 @@ "Debug Info": "", "Debug buttons": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "FW Build Date": "", "FW Series": "", @@ -290,15 +290,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "VCM Left Barcode": "", "VCM Right Barcode": "", "Venom FW Version": "", diff --git a/lang/cz_cz.json b/lang/cz_cz.json index ae5b50c..0b37ead 100644 --- a/lang/cz_cz.json +++ b/lang/cz_cz.json @@ -72,7 +72,6 @@ "Calibration in progress": "Probíhá kalibrace", "Start": "Start", "Continue": "Pokračovat", - "You can check the calibration with the": "Kalibraci můžete zkontrolovat pomocí", "Have a nice day :)": "Hezký den :)", "Welcome to the Calibration GUI": "Vítejte v GUI kalibrace", "Just few things to know before you can start:": "Jen pár věcí, které byste měli vědět, než začnete", @@ -175,6 +174,7 @@ "Debug buttons": "", "Does this software resolve stickdrift?": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "Error while saving changes": "", "FW Build Date": "", @@ -288,15 +288,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "VCM Left Barcode": "", "VCM Right Barcode": "", "Venom FW Version": "", diff --git a/lang/da_dk.json b/lang/da_dk.json index 4f34141..ff72401 100644 --- a/lang/da_dk.json +++ b/lang/da_dk.json @@ -73,7 +73,6 @@ "Calibration in progress": "Kalibrering er i gang", "Start": "Start", "Continue": "Fortsæt", - "You can check the calibration with the": "Du kan tjekke kalibreringen med", "Have a nice day :)": "Hav en god dag :)", "Welcome to the Calibration GUI": "Velkommen til Kalibrerings GUI", "Just few things to know before you can start:": "Bare et par ting, du skal vide, før du går i gang:", @@ -250,6 +249,7 @@ "Circularity": "", "Controller does not support adaptive trigger control": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Fail": "", "Failed": "", "Failed to connect to device": "", @@ -304,12 +304,11 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "", "Wiggle the USB cable to see if the controller disconnects.": "", diff --git a/lang/de_de.json b/lang/de_de.json index b093f3c..5cb6867 100644 --- a/lang/de_de.json +++ b/lang/de_de.json @@ -73,7 +73,6 @@ "Calibration in progress": "Kalibrierung läuft", "Start": "Start", "Continue": "Fortfahren", - "You can check the calibration with the": "Du kannst die Kalibrierung mit dem", "Have a nice day :)": "Einen schönen Tag noch! :)", "Welcome to the Calibration GUI": "Willkommen bei der Kalibrierungs-GUI", "Just few things to know before you can start:": "Nur wenige Dinge, die du wissen solltest, bevor du beginnst:", @@ -200,6 +199,7 @@ "Cosmic Red": "", "Debug": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "FW Update": "", "FW Update Info": "", @@ -292,15 +292,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "Venom FW Version": "", "Volcanic Red": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", diff --git a/lang/es_es.json b/lang/es_es.json index 1b7006d..45f0d09 100644 --- a/lang/es_es.json +++ b/lang/es_es.json @@ -72,7 +72,6 @@ "Calibration in progress": "Calibración en proceso", "Start": "Empezar", "Continue": "Continuar", - "You can check the calibration with the": "Puede verificar su calibración con el", "Have a nice day :)": "Que tenga un buen dia! :)", "Welcome to the Calibration GUI": "Bienvenido a la GUI de Calibración", "Just few things to know before you can start:": "Un par de cosas antes de empezar:", @@ -175,6 +174,7 @@ "Debug buttons": "", "Does this software resolve stickdrift?": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "Error while saving changes": "", "FW Build Date": "", @@ -288,15 +288,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "VCM Left Barcode": "", "VCM Right Barcode": "", "Venom FW Version": "", diff --git a/lang/fa_fa.json b/lang/fa_fa.json index 4e8768c..1360d8a 100644 --- a/lang/fa_fa.json +++ b/lang/fa_fa.json @@ -73,7 +73,6 @@ "Calibration in progress": "کالیبراسیون در حال انجام است", "Start": "شروع", "Continue": "ادامه", - "You can check the calibration with the": "می‌توانید کالیبراسیون را با", "Have a nice day :)": "روز خوبی داشته باشید :)", "Welcome to the Calibration GUI": "به رابط کاربری کالیبراسیون خوش آمدید", "Just few things to know before you can start:": "چند نکته قبل از شروع:", @@ -99,6 +98,7 @@ "Circularity": "", "Controller does not support adaptive trigger control": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Fail": "", "Failed": "", "Failed to connect to device": "", @@ -153,12 +153,11 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "", "Wiggle the USB cable to see if the controller disconnects.": "", diff --git a/lang/fr_fr.json b/lang/fr_fr.json index 01d647e..fa57f87 100644 --- a/lang/fr_fr.json +++ b/lang/fr_fr.json @@ -72,7 +72,6 @@ "Calibration in progress": "Calibrage en cours", "Start": "Démarrer", "Continue": "Continuer", - "You can check the calibration with the": "Vous pouvez vérifier le calibrage avec le:", "Have a nice day :)": "Bonne journée :)", "Welcome to the Calibration GUI": "Bienvenue dans l'Interface de calibrage", "Just few things to know before you can start:": "Juste quelques informations à savoir avant que vous ne puissiez commencer:", @@ -175,6 +174,7 @@ "Debug buttons": "", "Does this software resolve stickdrift?": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "Error while saving changes": "", "FW Build Date": "", @@ -288,15 +288,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "VCM Left Barcode": "", "VCM Right Barcode": "", "Venom FW Version": "", diff --git a/lang/hu_hu.json b/lang/hu_hu.json index c46bab0..2da8142 100644 --- a/lang/hu_hu.json +++ b/lang/hu_hu.json @@ -73,7 +73,6 @@ "Calibration in progress": "Kalibrálás folyamatban", "Start": "Kezdés", "Continue": "Folytatás", - "You can check the calibration with the": "Az újrakalibrálást ellenőrizheted az alábbi alkalmazással is:", "Have a nice day :)": "További szép napot kívánunk! :)", "Welcome to the Calibration GUI": "Üdvözöl a Dualshock/DualSense kalibrálást segítő alkalmazás!", "Just few things to know before you can start:": "Csak néhány dolog, amit tudnod kell, mielőtt belevágnál:", @@ -237,6 +236,7 @@ "Controller does not support adaptive trigger control": "", "Debug": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Fail": "", "Failed": "", "Failed to connect to device": "", @@ -303,12 +303,11 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "", "Wiggle the USB cable to see if the controller disconnects.": "", diff --git a/lang/it_it.json b/lang/it_it.json index 70071db..e862e25 100644 --- a/lang/it_it.json +++ b/lang/it_it.json @@ -73,7 +73,6 @@ "Calibration in progress": "Calibrazione in corso", "Start": "Avvia", "Continue": "Continua", - "You can check the calibration with the": "Puoi controllare la calibrazione con il", "Have a nice day :)": "Buona giornata! :)", "Welcome to the Calibration GUI": "Benvenuto alla Calibration GUI", "Just few things to know before you can start:": "Alcune cose da sapere prima di iniziare:", @@ -310,14 +309,14 @@ "After they have been replaced, this utility can be used to calibrate the controller to work with the new joysticks.": "", "Battery level is low. Tests may fail due to the controller being in power saving mode.": "", "Calibrating without replacing the joysticks may help temporarily, but it may also make the problem worse, with no way to undo it.": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Firefox is supported with the WebHID extension installed.": "", "Please use a web browser with WebHID support (e.g. Google Chrome or Microsoft Edge) on a PC or Mac.": "", "The device appears to be a clone. All calibration functionality is disabled.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "": "" } \ No newline at end of file diff --git a/lang/jp_jp.json b/lang/jp_jp.json index b57cb1f..f1eda6c 100644 --- a/lang/jp_jp.json +++ b/lang/jp_jp.json @@ -72,7 +72,6 @@ "Calibration in progress": "キャリブレーション進行中", "Start": "開始", "Continue": "続行", - "You can check the calibration with the": "キャリブレーションは次で確認できます", "Have a nice day :)": "良い1日を！ :)", "Welcome to the Calibration GUI": "Calibration GUIへようこそ", "Just few things to know before you can start:": "始める前に知っておくべきこと：", @@ -178,6 +177,7 @@ "Debug buttons": "", "Does this software resolve stickdrift?": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "Error while saving changes": "", "FW Build Date": "", @@ -288,15 +288,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "VCM Left Barcode": "", "VCM Right Barcode": "", "Venom FW Version": "", diff --git a/lang/ko_kr.json b/lang/ko_kr.json index 50ba24f..69258e3 100644 --- a/lang/ko_kr.json +++ b/lang/ko_kr.json @@ -73,7 +73,6 @@ "Calibration in progress": "보정 진행 중", "Start": "시작", "Continue": "계속", - "You can check the calibration with the": "다음을 통해 보정 상태를 확인할 수 있습니다:", "Have a nice day :)": "좋은 하루 되세요 :)", "Welcome to the Calibration GUI": "보정 GUI에 오신 것을 환영합니다", "Just few things to know before you can start:": "시작하기 전에 몇 가지 알아둘 사항이 있습니다:", @@ -247,6 +246,7 @@ "Circularity": "", "Controller does not support adaptive trigger control": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Fail": "", "Failed": "", "Failed to connect to device": "", @@ -302,13 +302,12 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Through": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "", "Wiggle the USB cable to see if the controller disconnects.": "", diff --git a/lang/nl_nl.json b/lang/nl_nl.json index e54a04a..0824274 100644 --- a/lang/nl_nl.json +++ b/lang/nl_nl.json @@ -72,7 +72,6 @@ "Calibration in progress": "Kalibratie wordt uitgevoerd", "Start": "Start", "Continue": "Continue", - "You can check the calibration with the": "U kunt de kalibratie controleren met", "Have a nice day :)": "Fijne dag :)", "Welcome to the Calibration GUI": "Welkom bij de kalibratie GUI", "Just few things to know before you can start:": "Een paar dingen die u moet weten voordat u kunt beginnen:", @@ -175,6 +174,7 @@ "Debug buttons": "", "Does this software resolve stickdrift?": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "Error while saving changes": "", "FW Build Date": "", @@ -288,15 +288,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "VCM Left Barcode": "", "VCM Right Barcode": "", "Venom FW Version": "", diff --git a/lang/pl_pl.json b/lang/pl_pl.json index db1f5f9..fa84694 100644 --- a/lang/pl_pl.json +++ b/lang/pl_pl.json @@ -73,7 +73,6 @@ "Calibration in progress": "Kalibracja w toku", "Start": "Start", "Continue": "Kontynuuj", - "You can check the calibration with the": "Możesz sprawdzić kalibrację za pomocą", "Have a nice day :)": "Życzę ci miłego dnia! :)", "Welcome to the Calibration GUI": "Witamy w Calibration GUI", "Just few things to know before you can start:": "O to kilka rzeczy o których musisz wiedzieć przed rozpoczęciem", @@ -314,13 +313,24 @@ "After they have been replaced, this utility can be used to calibrate the controller to work with the new joysticks.": "", "Battery level is low. Tests may fail due to the controller being in power saving mode.": "", "Calibrating without replacing the joysticks may help temporarily, but it may also make the problem worse, with no way to undo it.": "", + "Center": "", + "Circularity": "", + "Controller does not support adaptive trigger control": "", + "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", + "Fail": "", + "Failed": "", + "Failed to connect to device": "", + "Failed to disable adaptive trigger": "", + "Failed to set speaker tone": "", + "Failed to set vibration": "", + "Feel for vibration in the controller.": "", "Firefox is supported with the WebHID extension installed.": "", "Please use a web browser with WebHID support (e.g. Google Chrome or Microsoft Edge) on a PC or Mac.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "": "" } diff --git a/lang/pt_br.json b/lang/pt_br.json index f5bc083..df7982c 100644 --- a/lang/pt_br.json +++ b/lang/pt_br.json @@ -72,7 +72,6 @@ "Calibration in progress": "Calibração em progresso", "Start": "Inicio", "Continue": "Continuar", - "You can check the calibration with the": "Podes conferir a calibração com", "Have a nice day :)": "Tenha um bom dia :)", "Welcome to the Calibration GUI": "Bem vindo a interface de calibração", "Just few things to know before you can start:": "Somente algumas coisas para saber antes de você começar:", @@ -188,6 +187,7 @@ "Debug Info": "", "Debug buttons": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "FW Build Date": "", "FW Series": "", @@ -290,15 +290,14 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "Touchpad FW Version": "", "Touchpad ID": "", "USB Connector": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "VCM Left Barcode": "", "VCM Right Barcode": "", "Venom FW Version": "", diff --git a/lang/pt_pt.json b/lang/pt_pt.json index 8425c1b..ccf946a 100644 --- a/lang/pt_pt.json +++ b/lang/pt_pt.json @@ -72,7 +72,6 @@ "Calibration in progress": "Calibração em progresso", "Start": "Inicio", "Continue": "Continuar", - "You can check the calibration with the": "Pode verificar a calibração com o", "Have a nice day :)": "Tenha um bom dia :)", "Welcome to the Calibration GUI": "Bem-vindo à GUI de Calibração", "Just few things to know before you can start:": "Algumas coisas que precisa de saber antes de começar:", @@ -298,6 +297,7 @@ "Chroma Teal": "", "Cobalt Blue": "", "Cosmic Red": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Firefox is supported with the WebHID extension installed.": "", "Fortnite": "", "Galactic Purple": "", @@ -312,11 +312,10 @@ "The Last of Us": "", "The device appears to be a clone. All calibration functionality is disabled.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "Volcanic Red": "", "White": "", "": "" diff --git a/lang/rs_rs.json b/lang/rs_rs.json index ddf0cbd..cc08866 100644 --- a/lang/rs_rs.json +++ b/lang/rs_rs.json @@ -73,7 +73,6 @@ "Calibration in progress": "Kalibracija u toku", "Start": "Počni", "Continue": "Nastavi", - "You can check the calibration with the": "Možete proveriti kalibraciju sa:", "Have a nice day :)": "Želimo vam prijatan dan :)", "Welcome to the Calibration GUI": "Dobrodošli u interfejs za kalibraciju", "Just few things to know before you can start:": "Samo nekoliko stvari koje treba da znate pre nego što počnete:", @@ -211,6 +210,7 @@ "Cosmic Red": "", "Debug": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "DualSense Edge Calibration": "", "Fail": "", "Failed": "", @@ -295,16 +295,12 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "To store a custom calibration on the stick's internal memory, a hardware modification is required.": "", "USB Connector": "", -<<<<<<< HEAD "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", -======= "Use four-step calibration": "", "Use quick calibration": "", ->>>>>>> 6ba678a (Add option for which center calibration method to use on DS5 and Edge controllers) + "Using this utility on a phone or tablet is not supported.": "", "Volcanic Red": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "We are not responsible for any damage caused by attempting this modification.": "", diff --git a/lang/ru_ru.json b/lang/ru_ru.json index 5f8224e..c6e6ccb 100644 --- a/lang/ru_ru.json +++ b/lang/ru_ru.json @@ -72,7 +72,6 @@ "Calibration in progress": "Калибровка в процессе", "Start": "Старт", "Continue": "Продолжить", - "You can check the calibration with the": "Вы можете проверить калибровку с помощью", "Have a nice day :)": "Хорошего дня! :)", "Welcome to the Calibration GUI": "Добро пожаловать в Calibration GUI", "Just few things to know before you can start:": "Несколько вещей, о которых нужно знать, прежде чем начать:", @@ -227,6 +226,7 @@ "Cosmic Red": "", "Debug": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Fail": "", "Failed": "", "Failed to connect to device": "", @@ -301,15 +301,11 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "USB Connector": "", -<<<<<<< HEAD "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", -======= "Use four-step calibration": "", "Use quick calibration": "", ->>>>>>> 6ba678a (Add option for which center calibration method to use on DS5 and Edge controllers) + "Using this utility on a phone or tablet is not supported.": "", "Volcanic Red": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "", diff --git a/lang/tr_tr.json b/lang/tr_tr.json index 83d3610..da45fad 100644 --- a/lang/tr_tr.json +++ b/lang/tr_tr.json @@ -73,7 +73,6 @@ "Calibration in progress": "Kalibrasyon devam ediyor", "Start": "Başlat", "Continue": "Devam", - "You can check the calibration with the": "Kalibrasyonu şununla kontrol edebilirsiniz:", "Have a nice day :)": "İyi günler! :)", "Welcome to the Calibration GUI": "Kalibrasyon Arayüzü'ne hoş geldiniz", "Just few things to know before you can start:": "Başlamadan önce bilmeniz gereken birkaç şey:", @@ -318,13 +317,13 @@ "After they have been replaced, this utility can be used to calibrate the controller to work with the new joysticks.": "", "Battery level is low. Tests may fail due to the controller being in power saving mode.": "", "Calibrating without replacing the joysticks may help temporarily, but it may also make the problem worse, with no way to undo it.": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Firefox is supported with the WebHID extension installed.": "", "Please use a web browser with WebHID support (e.g. Google Chrome or Microsoft Edge) on a PC or Mac.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "": "" } diff --git a/lang/ua_ua.json b/lang/ua_ua.json index 495586a..0189cf5 100644 --- a/lang/ua_ua.json +++ b/lang/ua_ua.json @@ -73,7 +73,6 @@ "Calibration in progress": "Калібрування триває", "Start": "Старт", "Continue": "Продовжити", - "You can check the calibration with the": "Ви можете перевірити калібрування за допомогою", "Have a nice day :)": "Гарного дня! :)", "Welcome to the Calibration GUI": "Ласкаво просимо до інтерфейсу калібрування", "Just few things to know before you can start:": "Кілька моментів, які слід врахувати перед початком:", @@ -314,13 +313,13 @@ "After they have been replaced, this utility can be used to calibrate the controller to work with the new joysticks.": "", "Battery level is low. Tests may fail due to the controller being in power saving mode.": "", "Calibrating without replacing the joysticks may help temporarily, but it may also make the problem worse, with no way to undo it.": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Firefox is supported with the WebHID extension installed.": "", "Please use a web browser with WebHID support (e.g. Google Chrome or Microsoft Edge) on a PC or Mac.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "": "" } diff --git a/lang/zh_cn.json b/lang/zh_cn.json index 46bafc8..746571b 100644 --- a/lang/zh_cn.json +++ b/lang/zh_cn.json @@ -73,7 +73,6 @@ "Calibration in progress": "校准进行中", "Start": "开始", "Continue": "继续", - "You can check the calibration with the": "您可以通过以下方式检查校准", "Have a nice day :)": "您慢走 :)", "Welcome to the Calibration GUI": "欢迎使用校准 GUI", "Just few things to know before you can start:": "在开始之前，有几件事情需要了解：", @@ -315,13 +314,13 @@ "After they have been replaced, this utility can be used to calibrate the controller to work with the new joysticks.": "", "Calibrating without replacing the joysticks may help temporarily, but it may also make the problem worse, with no way to undo it.": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Firefox is supported with the WebHID extension installed.": "", "Please use a web browser with WebHID support (e.g. Google Chrome or Microsoft Edge) on a PC or Mac.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", "Use four-step calibration": "", "Use quick calibration": "", + "Using this utility on a phone or tablet is not supported.": "", "": "" } diff --git a/lang/zh_tw.json b/lang/zh_tw.json index a26997a..5f0fa2f 100644 --- a/lang/zh_tw.json +++ b/lang/zh_tw.json @@ -72,7 +72,6 @@ "Calibration in progress": "校準進行中", "Start": "開始", "Continue": "繼續", - "You can check the calibration with the": "您可以透過以下方式檢查校準", "Have a nice day :)": "祝您有美好的一天！ :)", "Welcome to the Calibration GUI": "歡迎使用校準 GUI", "Just few things to know before you can start:": "在開始之前，有幾件事情要了解：", @@ -242,6 +241,7 @@ "Circularity (R1)": "", "Controller does not support adaptive trigger control": "", "Don't show again": "", + "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "Fail": "", "Failed": "", "Failed to connect to device": "", @@ -303,15 +303,11 @@ "This test will cycle through red, green, and blue colors on the controller lightbar, animate the player indicator lights, and flash the mute button.": "", "This test will enable heavy resistance on both L2 and R2 triggers.": "", "This utility cannot fix stick drift.": "", - "Drift is caused by mechanical parts in the joystick being worn out, and they need to be replaced to fix the drift.": "", "USB Connector": "", -<<<<<<< HEAD "Unsupported browser.": "", - "Using this utility on a phone or tablet is not supported.": "", -======= "Use four-step calibration": "", "Use quick calibration": "", ->>>>>>> 6ba678a (Add option for which center calibration method to use on DS5 and Edge controllers) + "Using this utility on a phone or tablet is not supported.": "", "Watch the controller lights change colors, the player lights animate, and the mute button flash.": "", "While holding the stick to be adjusted straight up/down/left/right, make adjustments until you see lightblue sectors in all four directions after circling the stick both left and right. Then use the": "", "Wiggle the USB cable to see if the controller disconnects.": "", diff --git a/templates/calib-center-modal.html b/templates/calib-center-modal.html index 6479080..16a9329 100644 --- a/templates/calib-center-modal.html +++ b/templates/calib-center-modal.html @@ -47,7 +47,6 @@