From 080c4233ae50216ee697a0f1c5fb16aa5a034b9e Mon Sep 17 00:00:00 2001 From: dualshock-tools Date: Mon, 23 Sep 2024 10:50:38 +0200 Subject: [PATCH] Fixed zh_tw --- lang/zh_tw.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lang/zh_tw.json b/lang/zh_tw.json index c546092..f01372b 100644 --- a/lang/zh_tw.json +++ b/lang/zh_tw.json @@ -165,11 +165,11 @@ "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "我注意到某些控制器出廠時的工廠校準比我重新校準後還要差。尤其是 SCUF 控制器具有獨特外殼的圓形校準。", "(Dualsense) Will updating the firmware reset calibration?": "(Dualsense) 更新韌體會重置校準嗎？", "After range calibration, joysticks always go in corners.": "範圍校準後，搖桿總是會進入角落。", - "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "這個問題發生是因為你在開始範圍校準後立即點擊了"完成"。", + "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "這個問題發生是因為你在開始範圍校準後立即點擊了\"完成\"。", "Please read the instructions.": "請閱讀說明。", - "You have to rotate the joysticks before you press \"Done\".": "在按"完成"之前，必須旋轉搖桿。", + "You have to rotate the joysticks before you press \"Done\".": "在按\"完成\"之前，必須旋轉搖桿。", "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "確保觸摸搖桿框架的邊緣，並慢慢旋轉，最好是每個方向 - 順時針和逆時針。", - "Only after you have done that, you click on \"Done\".": "只有在這樣做之後，你才可以點擊"完成"。", + "Only after you have done that, you click on \"Done\".": "只有在這樣做之後，你才可以點擊\"完成\"。", "Changes saved successfully": "更改已成功保存", "Error while saving changes:": "保存更改時出錯：",